This page has all of our non 4x4 conversion parts that will work on almost any van! Bumpers, flares, rear skids, Onboard Air, tire carriers, steps, etc. Please check our 4WD Parts page for the restb of our product line. Thanks!
BB3 in WA
Desc: This is the UJOR aluminum front bumper for the 92-07 E series van. Made from 1/4" plate & 2" DIA tubing, this unit hits the scales at 37lbs! The winch plate is 1/2" and is ready for up to a Warn 16.5 winch. The bumper also includes 2 shackle mounts, a push button disconnect for an onboard air system, Warn power plug and a UJOR fairlead. We can equip the bumper to accept several lights, form a traditional round driving/fog light all the way up to a 30" Rigid LED bar (shown) with our FB001-30 brackets. Available in our standard UJOR black texture as well as a semi gloss to match the Aluminess rear bumper or polsihed raw!
We also offer several winch options with synthetic line upgrades.
Desc: Our 2" front receiver uses winch hardware to attach underneath the front bumper. Steel construction.
Desc: These brackets are made to attach a 30" Rigid LED light bar to the front bumper.
Desc: These brackets are made to attach a 30" Rigid LED light bar to the front bumper (pictured in both bumpers shown above)
Rigid 30" Light Bar: $950.00
Desc: This is our new bumper for the 08/up Ford E series. 100% Aluminum and fabricated from a 1/2" winch plate and 3/16 keverywhere else. Bumper comes winch ready and we built it around the Warn VR12-S winch. Like our FB001 bumper, this unit comes equipped with a Warn Amderson plug and an OBA quick disconnect. Our unique light mounting system allows for a wide variety of lighting options via a piece of extrude aluminum. Place your light where you want and lock it down!
***Bumper price does not include lights or any accesories ***
Desc: This is our new front bumper style for the 92-07 vans. All aluminum just like the others and includes an OBA port and power plug!
*** Bumper does not include lights ***
Part #: RS001
Desc: The UJOR rear skid system will allow you to utilize the "dead" space where the spare tire used to live. The Aluminum skid plate is a great place for an onboard air compressor, air tank, H2O tank & pump, auxiliary batteries, or anything else you can fit! The system includes a new weld in frame crossmember, complete grade 8 hardware kit, two bolt in support brackets, and an aluminum skid plate. Everything is powder coated UJOR black.
* The factory spare tire x-member must be removed from the frame, as well as the x-member directly behind the rear axle on EB (extended body) models
* Dimensions of the aluminum skid: 29" wide, 36" long, 12" of vertical clearance to the body (EB Models)
* Must use factory receiver hitch!
Desc: This is our underfloor storage that can be utilized with the rear skid system or not. It attaches to the van body, not the skid and is made from 3/16 Aluminum. Dims are 25.5 x 11 x 12" deep and we powdercoat all of it but the interior of the box as shown.
This is the new UJOR OBA (onboard air) system that mounts directly to the drivers side frame rail & body of your van! The frame mount is specifically designed to hold the ARB CKMTA12 compressor which is good for 135-150 psi and 6.16 CFM. It's a great compressor for its size. It draws 56 amps at max air flow and is sealed for moisture & dust resistance. The air tank is 2.5 gallons, and has 6 ports to run whatever you need. The fittings that are included are enough for several different setups and additional fittings may be needed for your particular needs. The air hose is 3/8 Goodyear instagrip and the kit comes with 35'. The kit also includes quick disconnects so you can run an airline to the front & rear of your van. A full wiring loom is included with the compressor and it's ready to power a pair of ARB lockers if you're equipped with them. All brakets are powdercoated black as well as the air tank, 3/8 grade 8 mounting hardware included. Email me with any questions!
Desc: This OBA accesory kit has everything you'll need to use the system to the max! Packed in the Pelican case is a 25' coil hose, ARB tire gauge/inflator, blow gun, set of Staun tire deflators and all of the fitings needed to hook it up to our quick disconnects.
Desc: Fender flares. We all know what they do! Protect the body and look good! Available for all 92 to current vans, only barn doors for the rear.
Desc: This is the Aluminess from bumper for the 92-07 Ford vans.
Part #: AF002
Desc: We all know that Aluminess makes really nice bumpers! This AF002 fits the 08/up E series and we have the option to run Rigid lights (shown) All aluminun construciton, winch ready, available with 2 different tube sizes or without tube at all. The picture to your right has our 30" Rigid mounting brackets.
Part #: AF002-30
Desc: These brackets are for mounting a 30" Rigid light bar to the AF002 bumper (shown in top picture)
Rigid Dually Spot: $189.99 (pr)
Rigid Dually Flood: $189.99 (pr)
Desc: The Aluminess rear bumper is another great unit with lots of options. The standard rear bumper comes with a drivers side tire mount and an open box on the pass side. This side can be upgraded any # of ways. deluxe box, deluxe box with rails, heavy duty swing arm for a bike rack, etc. LED license plate lights and several reverse lights are optional. We have our Rigid rear light upgrade shown.
AR-210020 Deluxe Box (shown) $825.00
AR-210020.1 Deluxe Box rails $100.00
AR-LIGHTS Standard reverse lights $75.00
AR-RIGID Rigid LED Light Mounts $49.95
AR-210222 Slim Expo kit (axe & shovel) $235.00
AR-210211 HD Bike Rack Swing Arm $400.00
RIG104112 Rigid LED Reverse Lights $458.00
Part #: AR-210009
Desc: If you're looking for a great rear tire carrier but don't want to get a full size bumper, this is for you. This Aluminess rear tire carrier fits between the frame rail & rear bumper and swings out to access the rear doors. Really nice piece! Fits up to a 35" tire.
Desc: These locking fuel doors not only keep the wrong people out of your fuel supply they look great!
Desc: These Aluminess nerf bars are a great way to add steps and protection to the rockers. They mount to the body so cannot be used as "sliders".
Part #: SM001
Price: $250.00 (pr)
Desc: These are the mounts you need to mount the super cool Toyota Sienna reclining seats in your E series! The seats can be found online, and we've got the mounts to get them bolted down. Your passengers will thank you forever! (mine do!)
The sPOD system is an excellent way to control all of the extras that we love to add to our vans. Lights, compressor, lockers, etc can all be managed easily with the sPOD system. The "Source" mounts under the hood and has one wire loom that gets routed to the dash of the van. This makes the install much cleaner, especially on our vans with limited firewall space to pass a bucnh of wires through. We have 2 different underhood mounts, one for the 6.0 and one for everything else. For the 09/up dash we have a nice plate that mounts to the dash, 92-07 vans have a few options for mounting (D side door works great) Shoot us an email if you have any questions.
sPOD Universal system: $363.00
sPOD Dash mount 09/up: $39.00
sPOD Unerhood mount for 6.0s: $50.00
sPOD Underhood mount non 6.0: $50.00
Part #: FM001
Desc: These floor mats are available in Black, Tan, or Gray. They're really great for catching mud & dirt that has no business on your carpet.